Number Of Database Connections
From PostgreSQL wiki
You can often support more concurrent users by reducing the number of database connections and using some form of connection pooling. This page attempts to explain why that is.
A database server only has so many resources, and if you don't have enough connections active to use all of them, your throughput will generally improve by using more connections. Once all of the resources are in use, you won't push any more through by having more connections competing for the resources. In fact, throughput starts to fall off due to the overhead from that contention.
The Need for an External Pool
If you look at any graph of PostgreSQL performance with number of connections on the x axis and tps on the y access (with nothing else changing), you will see performance climb as connections rise until you hit saturation, and then you have a "knee" after which performance falls off. A lot of work has been done for version 9.3 to push that knee to the right and make the fall-off more gradual, but the issue is intrinsic -- without a built-in connection pool or at least an admission control policy, the knee and subsequent performance degradation will always be there.
The decision not to include a connection pooler inside the PostgreSQL server itself has been taken deliberately and with good reason. In many cases you will get better performance if the connection pooler is running on a separate machine. Also, you can get improved functionality by incorporating a connection pool into client-side software. Many frameworks do the pooling in a process running on the the database server machine (to minimize latency effects from the database protocol) and accept high-level requests to run a certain function with a given set of parameters, with the entire function running as a single database transaction. This ensures that network latency or connection failures can't cause a transaction to hang while waiting for something from the network, and provides a simple way to retry any database transaction which rolls back with a serialization failure (SQLSTATE 40001 or 40P01).
Since a pooler built in to the database engine would be inferior (for the above reasons), the community has decided not to go that route.
Reasons for Performance Reduction Past the "Knee"
There are a number of independent reasons that performance falls off with more database connections.
- Context switches. The processor is interrupted from working on one query and has to switch to another, which involves saving state and restoring state. While the core is busy swapping states it is not doing any useful work on any query.
- Cache line contention. One query is likely to be working on a particular area of RAM, and the query taking its place is likely to be working on a different area; causing data cached on the CPU chip to be discarded, only to need to be reloaded to continue the other query. Besides that the various processes will be grabbing control of cache lines from each other, causing stalls. (Humorous note, in one oprofile run of a heavily contended load, 10% of CPU time was attributed to a 1-byte noop; analysis showed that it was because it needed to wait on a cache line for the following machine code operation.)
- Lock contention. This happens at various levels: spinlocks, LW locks, and all the locks that show up in pg_locks. As more processes compete for the spinlocks (which protect LW locks acquisition and release, which in turn protect the heavyweight and predicate lock acquisition and release) they account for a high percentage of CPU time used.
- RAM usage. The work_mem setting can have a big impact on performance. If it is too small, hash tables and sorts spill to disk, bitmap heap scans become "lossy", requiring more work on each page access, etc. So you want it to be big. But work_mem RAM can be allocated for each node of a query on each connection, all at the same time. So a big work_mem with a large number of connections can cause a lot of the OS cache to be periodically discarded, forcing more accesses to disk; or it could even put the system into swapping. So the more connections you have, the more you need to make a choice between slow plans and trashing cache/swapping.
- Disk access. If you do need to go to disk for random access, a large number of connections can tend to force more tables and indexes to be accessed at the same time, causing heavier seeking all over the disk.
- General scaling. Some internal structures allocated based on max_connections scale at O(N^2) or O(N*log(N)). Some types of overhead which are negligible at a lower number of connections can become significant with a large number of connections.
How to Find the Optimal Database Connection Pool Size
A formula which has held up pretty well across a lot of benchmarks for years is that for optimal throughput the number of active connections should be somewhere near ((core_count * 2) + effective_spindle_count). Core count should not include HT threads, even if hyperthreading is enabled. Effective spindle count is zero if the active data set is fully cached, and approaches the actual number of spindles as the cache hit rate falls. Benchmarks of WIP for version 9.3 suggest that this formula will need adjustment on that release. There hasn't been any analysis so far regarding how well the formula works with SDDs.
However you choose a starting point for a connection pool size, you should probably try incremental adjustments with your production system to find the actual "sweet spot" for your hardware and workload.